幸运时时彩

Welcome to the official website of Chengdu Senge environment protection technology Co。, Ltd


成都森格尔环保科技幸运时时彩

幸运时时彩Chengdu senge environmental protection technology co.LTD


Consultation Hotline:02865357899

Production, Sales and Development of Ion Exchange Resin

成功案例

News

Hot key words

Contact us

Contact person: Manager Liu

Location: 028-65357899

幸运时时彩Mobile phone: 15680686111

Mailbox: chengdu@sgrhb。com

Fax: 028-65357899

Email: chinaresin@sgrhb。com

Website: www.ellencarla.com

Website  :    en。sgrhb。com

Address: 79 Jiujin Street, Wuhou District, Chengdu City, Sichuan Province


What conditions are needed for regeneration of Sichuan anion exchange resin?

Your current location: Home >> News >> Company News

What conditions are needed for regeneration of Sichuan anion exchange resin?

Date of release:2018-12-18 Author: Click:

  What conditions are needed for ion exchange resin regeneration?

  Regeneration and backwashing of anion exchange resin is the key point in water treatment equipment. There are many factors affecting resin regeneration, such as selection of resin regenerant and different concentration of softening resin regeneration solution. In order to get the ideal regeneration effect, we must always adjust the resin regeneration process, and then determine which is the best regeneration condition.

  Regeneration Conditions of Sichuan Anion Exchange Resin

  1. Different kinds of regenerants

  Generally speaking, the regeneration performance of external hydrochloric acid is better than that of sulfuric acid, but in fact, the investment of using sulfuric acid is less than that of hydrochloric acid. The purity of regenerant is high, so the resin regeneration is good, especially the effect of anion resin regeneration is greater.

  2. dosage of regenerant

  The amount of regenerant used in anion exchange resin is an important factor affecting its regeneration. The concept of regenerant input refers to the amount of regenerant used in a certain volume of resin, in units of kg/m3 (resin) or g/L (resin). In fact, there is another way to express the amount of regenerant used, that is, to estimate the pure regeneration dose required to obtain the unit operating capacity.

凝胶型离子交换树脂

  3. Concentration of regeneration solution of anion exchange resin

  The high and low concentration of resin regeneration solution is usually closely related to the regeneration method chosen by resin. Generally speaking, the concentration of regeneration solution of ion exchange resin in Sichuan is usually higher than that in countercurrent regeneration. Usually 3% to 55% hydrogen chloride is preferable, and 2% to 4% sodium hydroxide is preferable.

  Suitable regeneration method of anion exchange resin

  Anion exchange resin agents give three different ways for resin regeneration, different agents will adopt the same way of regeneration, that is, moving from top to bottom, using convective regeneration method can achieve good water quality, so this is a favorite method for many manufacturers.


The address of this article:http://en.ellencarla.com/news/448.html

Key word:anionexchangeresin

Recently browse:

Chengdu Senger Environmental Technology Co。, Ltd。

Record No: 蜀ICP备19000327号

Powered by Xiangyun Platform 

Contact person: Manager Liu

幸运时时彩Location: 028-65357899

Mobile phone: 15680686111

Email: chinaresin@sgrhb。com



四川离子交换树脂1544145157754088.png

  • Service
  • number
    15680686111
  • Message
  • Online Service
    大地棋牌 北京赛车pk10计划 秒速时时彩 吉林快3 幸运时时彩 吉林快3 吉林快3 大地棋牌游戏 幸运时时彩 吉林快3