幸运时时彩

Welcome to the official website of Chengdu Senge environment protection technology Co., Ltd


成都森格尔环保科技幸运时时彩

幸运时时彩Chengdu senge environmental protection technology co.LTD


Consultation Hotline:02865357899

Production, Sales and Development of Ion Exchange Resin

成功案例

News

Hot key words

Contact us

Contact person: Manager Liu

Location: 028-65357899

Mobile phone: 15680686111

Mailbox: chengdu@ellencarla.com

Fax: 028-65357899

Email: chinaresin@ellencarla.com

Website: www.ellencarla.com

Website  :    en.ellencarla.com

Address: 79 Jiujin Street, Wuhou District, Chengdu City, Sichuan Province


Pollution Analysis of Ion Exchange Resin in Operation

Your current location: Home >> News >> 幸运时时彩Anionic Resin Knowledge

Pollution Analysis of Ion Exchange Resin in Operation

Date of release:2019-05-06 Author: Click:

  The pollution of ion exchange resin in the process of operation showed that the color became darker, the exchange capacity of resin continued to decline, the clean water increased, the quality of effluent became worse, and the production capacity of effluent declined。 Ion exchange resins can be divided into styrene resin and acrylic resin according to their matrix types。 The main properties and types of resins are determined by the types of chemical active groups in resins。 Firstly, it can be divided into cationic resins and anionic resins, which can exchange ions with cations and anions in solution respectively。 Cationic resins can be divided into strong acidity and weak acidity。 Anionic resins can be divided into strong alkalinity and weak alkalinity。 It can be considered that the resin has been contaminated

  The organic matter caused by (+-*/}) tends to be negatively charged in water and has become the main pollutant of anionic resin。 Organic substances mainly exist in natural water humic acid, micellar organic impurities, polymers with relative molecular weight of 500-5000 and polyorganic phosphoric acid。 These substances adsorb on the resin, some occupy or combine the active groups on the resin, and some make the alkalinity of the strong alkali active groups of the resin decrease and degrade, thus reducing the ion exchange capacity of the anion exchange resin。 This contamination can be detected from chemical oxygen demand monitoring。 Pollution caused by grease usually contains oily substances, forming membranes, and active groups in blocked or coated microporous resins are extracted by ion interactions。 ion exchange resin

  Contamination of suspended solids in water (+-*/}) liquid membranes are tightly wrapped around the resin surface, thus separating the ion exchange process of the resin and causing the resin to be contaminated, which is mainly caused by cationic resins。 Because of colloidal substances

  As a result of pollution, colloidal particles in water often contain negative ions, which pollute anionic resins. Ion exchange resin is composed of classification name, skeleton (or gene) name and basic name. The pore structure is divided into two types: gel type and large pore type. All macroporous resins with physical pore structure are added "big hole" before the full name. If the classification is acidic, the word "yang" should be added before the name, while the classification is alkaline, and the word "yin" should be added before the name. Such as: macroporous strong acidic styrene cation exchange resin. Colloidal silica is the most harmful to resin. It adsorbs and polymerizes on the surface of anion exchange resin in order to prevent resin from exchanging ions.

  High valence metal ions in ion exchange resins (e。g。 the reverse movement of high valence metal ions in coagulants) cause raw water

幸运时时彩  Highly polluted, such as A13 + and Fe3 + diffusion into cationic resins, the exchange potential energy of these high valent metal ions is higher, and the fixed ions SO 32 - in resins form Al (SO3) 3, Fe (SO3) 3, etc. Therefore, the use of this part of fixed ions loses its function and the ability to exchange free ions.

  Contamination caused by impurities in ion exchange resins is often mixed with many impurities。 Ion exchange resin is composed of classification name, skeleton (or gene) name and basic name。 The pore structure is divided into two types: gel type and large pore type。 All macroporous resins with physical pore structure are added "big hole" before the full name。 If the classification is acidic, the word "yang" should be added before the name, while the classification is alkaline, and the word "yin" should be added before the name。 Such as: macroporous strong acidic styrene cation exchange resin。 Longqi is an impurity in caustic soda (NaOH), such as pure Fe3+, NaCl, Na2CO3, etc。 Anionic resins are the most polluted。


The address of this article:http://en.ellencarla.com/news/516.html

Key word:幸运时时彩IonExchangeResin

Recently browse:

Chengdu Senger Environmental Technology Co., Ltd.

幸运时时彩Record No: 蜀ICP备19000327号

Powered by Xiangyun Platform 

Contact person: Manager Liu

Location: 028-65357899

Mobile phone: 15680686111

Email: chinaresin@sgrhb。com



四川离子交换树脂1544145157754088.png

  • Service
  • number
    15680686111
  • Message
  • Online Service
    幸运时时彩 吉林快3 幸运时时彩 幸运时时彩 秒速时时彩 幸运时时彩开奖记录 幸运时时彩 秒速时时彩 幸运时时彩官网 幸运时时彩官网